# Post Configuration Checks

LED light and what they mean.

{% embed url="<https://docs.px4.io/v1.9.0/en/getting_started/led_meanings.html>" %}

![LED meanings](https://docs.px4.io/v1.9.0/images/led_meanings.gif)

**\[Solid Blue] Armed, No GPS Lock:** Indicates vehicle has been armed and has no position lock from a GPS unit. When vehicle is armed, PX4 will unlock control of the motors, allowing you to fly your drone. As always, exercise caution when arming, as large propellers can be dangerous at high revolutions. Vehicle cannot perform guided missions in this mode.

**\[Pulsing Blue] Disarmed, No GPS Lock:** Similar to above, but your vehicle is disarmed. This means you will not be able to control motors, but all other subsystems are working.

**\[Solid Green] Armed, GPS Lock:** Indicates vehicle has been armed and has a valid position lock from a GPS unit. When vehicle is armed, PX4 will unlock control of the motors, allowing you to fly your drone. As always, exercise caution when arming, as large propellers can be dangerous at high revolutions. In this mode, vehicle can perform guided missions.

**\[Pulsing Green] Disarmed, GPS Lock:** Similar to above, but your vehicle is disarmed. This means you will not be able to control motors, but all other subsystems including GPS position lock are working.

**\[Solid Purple] Failsafe Mode:** This mode will activate whenever vehicle encounters an issue during flight, such as losing manual control, a critically low battery, or an internal error. During failsafe mode, vehicle will attempt to return to its takeoff location, or may simply descend where it currently is.

**\[Solid Amber] Low Battery Warning:** Indicates your vehicle's battery is running dangerously low. After a certain point, vehicle will go into failsafe mode. However, this mode should signal caution that it's time to end this flight.

**\[Blinking Red] Error / Setup Required:** Indicates that your autopilot needs to be configured or calibrated before flying. Attach your autopilot to a Ground Control Station to verify what the problem is. If you have completed the setup process and autopilot still appears as red and flashing, there may be another error.

Reference for Tones&#x20;

{% embed url="<https://docs.px4.io/v1.9.0/en/getting_started/tunes.html>" %}
