The Hawk
  • The OnPoynt Hawk or Longbow- NAZA
  • Notes Before Beginning
  • Safety
  • Arms and Motor Mounts
  • Lower Plate
  • Mounting the Arms
  • Mounting the Naza Flight Controller
  • Landing Gear and Payload Plate
  • Software Installation
  • Setting up the flight controller
  • FS-I6S Set up - Naza
  • Propellers
  • Pre-flight
  • Compass Calibration and Arming the Motors
  • Done ! Let's Fly
Powered by GitBook
On this page
  • Ensure all wires are clear of the propellers and secure prior to motor start.
  • Ensure battery is secure with Velcro pads and Velcro battery strap.
  • Flight area should be large (football / soccer field) and clear of people.
  • Ensure remote control has at lease 50% power

Was this helpful?

Pre-flight

Ensure all wires are clear of the propellers and secure prior to motor start.

Ensure battery is secure with Velcro pads and Velcro battery strap.

Flight area should be large (football / soccer field) and clear of people.

Ensure remote control has at lease 50% power

​

PreviousPropellersNextCompass Calibration and Arming the Motors

Last updated 4 years ago

Was this helpful?