Bottom Plate Assembly

Step 1

Slide each arm over the 12mm M3 bolts like shown to the left. The holes can be tight so you may need to pick it up, flip it over and screw the bolts in if they don’t slide in easily.

Step 2

Slide each arm over the 12mm M3 bolts like shown to the left. The holes can be tight so you may need to pick it up, flip it over and screw the bolts in if they don’t slide in easily.

Step 3

Now you can add the middle plate and the four black nylock nuts.

Don't tighten down yet

Step 4

Next you will add the other four 12mm bolts and the four silver M3 nuts like below. Then go around and tighten all eight 12mm bolts and M3 nuts firmly.

Step 5

Nylon Stand offs

Take the nylon standoffs and screw them onto the four 12mm M3 bolts.