Mounting the Camera

Step 1

Camera and Mounts

Take the last two standoffs, the camera, and the 3D printed camera mounts and attach them as shown. The screws will be included in the camera packaging and possibly could come with a long pair and a short pair of screws. You will want to use the short screws.

Step 2

Slide standoffs through Camera mounts, it will be very snug.

Step 3

Add the last 2 standoffs, that now has the camera attached, to the drone.

Then connect the camera connector, paying special attention to where the pins are and matching color to color of wires.

Bent pins is the fastest way to disable your drone so be careful!